: 10 Mistakes that Most People Make

Published by: 0

Disadvantages of Not Installing a Fuel Filter Water Separator in Your Diesel Engine

Fuel filter water separators help in preventing condensation in your engine’s fuel system. Without a fuel filter water separator, the diesel fuel in your engine might end up being contaminated. The contamination of fuel by water does not usually affect petrol vehicles. Water enters the diesel fuel when the tank cools down, and humid air gets sucked back. The moist air usually contains water that condenses on the walls of the cooler tank. Having water in your fuels is dangerous. Fuel filter water separators are mainly used to clean the fuel and prevent damage to internal components. In addition to that, the separator is used for water removal from the fuel in the fuel system.

The following are the dangers of having water in your fuel. Water is a cause of rust. Water usually reacts with iron and steel surfaces in the presence of oxygen to cause rust. When the rust grows, it usually reneges and may enter the fuel. Rust has abrasive properties. When the rust gets into your fuel, it wears parts of the fuel system and thus causing failure. Water is also a cause of corrosion in fuel systems and engines. Fossil fuels usually contain acids that get activated in the presence of water to cause corrosion to the ferrous and nonferrous metals.

Oil usually has lubricating properties that help prevents wear and tear of the moving parts in the engine and fuel systems. However, when the fuel is contaminated with water, it then causes abrasion of the moving parts. Water does not have lubrication properties that are present in diesel fuels due to the low viscosity. Water also promotes microbial growth. All living things require water for their growth. Microbial growth is a source of dirt in the fuel that leads to damage to the fuel system and engine. Another big problem of having water contamination in diesel fuels is that the injection system gets damaged. When the injection system is damaged, you end up experiencing problems starting the engine of your car.

Therefore, if you want to avoid facing the problem of water contamination in your engine, you should install a fuel filter water separator. Fuels filter water separator usually contain materials that have hydrophobic properties that help in separating the water that is in your engine. The water then collects on the bottom of the separator because it is denser than fuel. Therefore, all you need is to drain the water from the separator once it is full. If you want to install a fuel filter water separator in your vehicle, find an experienced and skilled auto mechanic. Fuel filter water separators are subject to water and tear after prolonged use. To ensure that you keep your engine safe, you should regularly change the filters. There are guidelines laid down by the manufacturers to help in proper removal of old filters and installation of new ones. An experienced and skilled auto mechanic is well acquainted with the guidelines.

If You Read One Article About , Read This One

The 9 Most Unanswered Questions about